Altana Esp-10 Manuel d'utilisateur télécharger pdf (Page 20)

• Pull forward and turn the locking

button to adjust the working

pressure until the manometer

indicates 3 bar. During this

procedure press down the release

lever (6) at the right side of the

instrument several times in order

to guarantee a precise pressure

adjustment.

• Push back the button (1) to re-

lock the pressure reducer. Now

the unit is ready for operation.

3. Adjusting the Working

Pressure of 3 bar

• Connect the open end of the air

hose to the fitting piece on the

back panel of the instrument

") and secure the air hose

with the union nut.

• Connect the other end of the

hose, equipped with a fitting

(NW 7.2 mm), to the quick action

closure of the compressed-air

supply (max. 5 bar).

• The compressed air should be

oilfree and dehumidified by a

water seperator.

• If the air supply has to be stopped

or interrupted, first release the

quick action closure of the

compressed-air supply (which

should be near the instrument),

and then release the union nut.

2. Connection to the

Compressed-air System

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 29 30

Pas de commentaire

Altana Esp-10 Manuel d'utilisateur Page 20