Altana Wave-Scan II Manuel d'utilisateur télécharger pdf (Page 48)

English

Due to the underlying measurement

principle, no calibration of the

instrument is required. It is

recommended, however, to check the

functionality of the instrument at

regular intervals (about once every 3

months). The reference tile included

with delivery is provided for this

purpose.

Testing the instrument 14

Select the “Standard” in the Measure

menu. The configuration of this

organizer is fixed and cannot be

changed.

The unit then switches to the

measurement mode.

Place the instrument on the test tile

marked „Standard“ or „Standard 1“ as

shown above and perform three

measurements.

wave-scan dual only:

After having finished these readings,

you are prompted to take three more

readings on Standard 2.

Place the instrument on the test tile

marked Standard 2 and perform three

measurements.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 187 188

Pas de commentaire

Altana Wave-Scan II Manuel d'utilisateur Page 48