Altana LC 4 Manuel d'utilisateur télécharger pdf (Page 15)

BYKLC4 Operation

Touch screen

operation

In this operating manual, keys are indicated by angle brackets <..>.

The touch screen symbol (example <3>) shows you which area you have

to press. Function keys are indicated by the relevant name or symbol.

The keys can have different functions with a long and short keystroke.

In this operating manual, the key symbol (e. g. <E>) generally means a

short keystroke (shorter than 1 sec). A long keystroke (approx. 1 sec) is indi-

cated by a line after the key symbol (e. g. <E_>).

Operating examples:

Note

Any keystroke is confirmed by an acoustic signal.

With a short keystroke you hear a short sound, after a long keystroke you

hear a longer sound.

Symbol Meaning

<(> Press any spot on the display shortly.

(Example: switch on the meter)

<"_> Press any key in the upper display line for a

longer time (approx. 1 sec).

(Example: switch over the measured value

display between conductivity, specific resis-

tance etc.)

<C> Press "CAL" shortly.

<U> Press the "Clock symbol" shortly.

<E_> Press "ESC" for a longer time (approx. 1 sec).

(Example: switch off the meter)

<<> or <>> Press <<> or <>> shortly.

Increase or reduce the displayed value by 1.

<<_> or <>_> Press <<> or <>> for a longer time (approx.

1sec).

Increase or reduce the displayed value

consecutively.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 60 61

Pas de commentaire

Altana LC 4 Manuel d'utilisateur Page 15